销售咨询热线:
13121779988
产品中心

配料罐

描述:配料罐上部采用多层分流刮壁搅拌总成,采用活套连轴器连成由正转刮壁叶和反转多层分流式浆液组成。采用不同转速及转向对药液进行高效混合。
更新时间:2024-09-27
产品型号:HT生产型
厂商性质:生产厂家
详情介绍

 

配料罐


Bi-directional mixing homogenizing solution proportioning tank


. 配料罐上部采用多层分流刮壁搅拌总成,采用活套连轴器连成由正转刮壁叶和反转多层分流式浆液组成。采用不同转速及转向对药液进行高效混合。


. 底部采用高剪切乳化分散器和变频调速搅拌,使药液通过高剪切乳化分散器重定子与专子间隙运转原理强化剪切混合的作用,达到快速而有效的混合均质。


. 适用于多种不同物料混合,罐体采用内胆,加温层,保温层等三层结构,用循环热水对罐内进行加热,具有混合性能强,真空效果好,加热均匀,粗粒剪切,刮壁清洗方便。符合国家GMP卫生标准要求。

This equipment scraping the upper wall of mixing multi-layer shunt assembly, with live sets from the couplings are transferred into a scrape with the wall leaves and reverse multi-Split slurry composition. Different speed and turn on the efficient liquid mixing.
2. The bottom of the high shear emulsification stirring device and frequency control, so that liquid was highly valued by high-shear emulsification operation of the stator and the special sub-gap principle to strengthen the role of shear mixing, to achieve rapid and effective mixing homogeneous.
3. This equipment is applicable to many different materials mixed with tank liner, heating layer, insulation layer three-tier structure, with a circulation hot water heating on the tank, with mixed performance, the vacuum effect, even heating , coarse cut, scrape the wall clean. GMP requirements in line with national health standards.

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7